Numbers
Numbers for agility Set of colourful, safe numbers for agility, made of flexible PCV plastic. Weather resistant, suitable for indoor and outdoor use. Available in...
Select options
2 in stock
FDS Agility timer
Time measuring device for agility competitions, produced by the Swiss company FDS-timing
https://fdstiming.com/
The set is prepared for use at agility competitions of any rank.
The full set consists of:
The TBox main purpose is to capture time events triggered by manual switches, photocells or other devices. Those events are then transmitted to your preferred timing applications via serial port or USB.
TBox consists of high-end electronic components and is equipped with sophisticated firmware, all housed in a simple and functional case, ensuring professional performance at competitive costs.
The timing console TBox is the most important part of the set connecting all the peripheral devices into one working set.
There is a button (no2) on the device to manually stop time if the dog leaves the ring without crossing the finish gate.
Up to 6 gates can be connected to the timing console wirelessly and 2 through cables.
The set contains two wireless gates (for start and finish).
The device is battery powered and can be charged through USB C port, also during operation.
Interface to connect to a PC
It is possible to choose from several available protocols: Alge, FDS, Seiko, which allow you to automatically transmit the time measured to the software for calculating the results.
Homologation for TBox-41
FIS : FDS.001T.20
FEI : 2019001-1B/C
Precision 1/10’000 sec
Each gate consists of 2 freestanding sets of sensors.
There are 16 sensors placed every 5 cm, starting from 20 cm above the ground and reaching 95 cm, ensuring that the gate can detect dogs in any height category.
The maximum distance between two sides of the gate is 160 cm.
The gates are weather (sun and rain) resistant.
When using radio connection with the timing console, the distance should not exceed 500 m.
The display can be powered by 230V (the power supply is included in the set) or 12V-24V battery (not included in the basic set).
The data from the Tbox can be sent through the radio or a cable.
The display can work in any of the 10 colours available: Red, Green, Blue, Yellow, Magenta, Cyan , White, Orange, Deep pink, Light Blue.
The printer is connected by a cable to the timing console. It prints the exact time the competitor has started and net time of the run (the net time is a difference between time the run has ended and the time the run has started).
Select options
- start gate with wireless transmitter,
- finish gate with wireless transmitter,
- display,
- printer,
- timing console.
- 2 chargers
Timing console - TBox
The TBox main purpose is to capture time events triggered by manual switches, photocells or other devices. Those events are then transmitted to your preferred timing applications via serial port or USB.
TBox consists of high-end electronic components and is equipped with sophisticated firmware, all housed in a simple and functional case, ensuring professional performance at competitive costs.
The timing console TBox is the most important part of the set connecting all the peripheral devices into one working set.
There is a button (no2) on the device to manually stop time if the dog leaves the ring without crossing the finish gate.
Up to 6 gates can be connected to the timing console wirelessly and 2 through cables.
The set contains two wireless gates (for start and finish).
The device is battery powered and can be charged through USB C port, also during operation.
Interface to connect to a PC
It is possible to choose from several available protocols: Alge, FDS, Seiko, which allow you to automatically transmit the time measured to the software for calculating the results.
Homologation for TBox-41
FIS : FDS.001T.20
FEI : 2019001-1B/C
Precision 1/10’000 sec
Gates - start and finish
Each gate consists of 2 freestanding sets of sensors.
There are 16 sensors placed every 5 cm, starting from 20 cm above the ground and reaching 95 cm, ensuring that the gate can detect dogs in any height category.
The maximum distance between two sides of the gate is 160 cm.
The gates are weather (sun and rain) resistant.
When using radio connection with the timing console, the distance should not exceed 500 m.
Display
The display can be powered by 230V (the power supply is included in the set) or 12V-24V battery (not included in the basic set).
The data from the Tbox can be sent through the radio or a cable.
The display can work in any of the 10 colours available: Red, Green, Blue, Yellow, Magenta, Cyan , White, Orange, Deep pink, Light Blue.
Printer
The printer is connected by a cable to the timing console. It prints the exact time the competitor has started and net time of the run (the net time is a difference between time the run has ended and the time the run has started).
Full antislippery tunnel
Professional tunnel for dog agility. Diameter: 60 cm.
Detailed description below.
Select options
Tunnel holder
Safe, light holder for tunnel of 60 cm diameter to prevent the tunnel from moving. (without sand)
Availability: shipping within 7-14 days after receiving the payment.
Select options
Banner for the jump
Best banners for agility jumps! The banners for agility jumps produced by cool-dog.eu are perfect for both training and professional agility competitions. If you’re looking...
Select options
jump components
Pipe connectors – set of 10 (32 mm)
We sell pipe connectors for anyone who wants to build their own jumps for agility training at home. These are the exact same connectors we use to build our own obstacles – they’re very strong and durable, perfect for agility practice.
The set includes 10 connectors, size 32 mm. Other sizes are available on request – just contact us!
We understand that building your own obstacles is part of the fun of agility training. That’s why our shop has everything you need: poles, banners, stickers and hooks – all designed to fit your DIY jump setups.
Plastic agility jump
Professional and safe agility jump, for training and competition use. The banner filling the wing can be fully personalised.
Select options
Cavaletti Jump
Cavaletti jumps Perfect for fitness exercises and jumping grids, handy, light and portable. Regulated height from 10 to 25 cm. The set consists of two wings, two pole holders and 1,2 m pole.
Add to cart
See-saw weight
Bag to be filled with sand to weight the see-saw down.
The bag can contain 15 kg - 20 kg of sand.
The bottom of the bag is made of antislippery material to prevent the bag from sliding.
Select options
Soft regulators
Color: blue, yellow
Size :
Select options
- sall 120cm x 8 cm x 5cm
- big 120cm x 20cm x 10cm
Soft rounded bricks
Soft, brightly coloured elements make the training safe and pleasant for your dog.
Size:30 x 20 x 10cm (length, width, height)
soft wall elements
The soft elements of the wall make the training pleasant and safe for your dog.
The product can be used to regulate the wall height by 5 cm increments.
Dimensions: 120 x 20 x 5cm (length, width, height)
Select options
Need4Grid measuring tape
Professional measuring tape that makes setting up the jumping grids easier than ever! Thanks to Need4Grid measuring tapes you can easily set up different exercises for dogs from all agility height categories.
Availability: shipping within 7 days after receiving the payment.
Select options
